I found another great deal on Craigslist. $225 for a Central Machinery 9"x 20" Bench Lathe.
This lathe is like new condition and most of the accessory are still brand new. After spraying and wiping down the lathe, I would say it was used only a few times because there is little to no wear on any of the parts.
![Central Machinery 9x20 Bench Lathe - 45861](images/Lathe/01.jpg)
Here is the face plate and 4 jaw chuck.
![Central Machinery 9x20 Bench Lathe - 45861](images/Lathe/02.jpg)
Steady Rest
![Central Machinery 9x20 Bench Lathe - 45861](images/Lathe/03.jpg)
4 drill chuck, live center and dead center for the tail stock turret.
![Central Machinery 9x20 Bench Lathe - 45861](images/Lathe/04.jpg)
Quick change tool post which I did not end up using but 4 tool holders will work for the new quick change tool post that I ordered. I also got this funny contraption, which is a tail stock turret. I think I was a great idea but it did not work very well for my setup.
![Central Machinery 9x20 Bench Lathe - 45861](images/Lathe/05.jpg)
Here are some extra metal gears, MT3 dead center and some tools.
![Central Machinery 9x20 Bench Lathe - 45861](images/Lathe/06.jpg)
After removing all the shipping grease on the Lathe with WD40, this lathe looks pretty much brand new.
![Central Machinery 9x20 Bench Lathe - 45861](images/Lathe/07.jpg)
![Central Machinery 9x20 Bench Lathe - 45861](images/Lathe/08.jpg)
![Central Machinery 9x20 Bench Lathe - 45861](images/Lathe/09.jpg)
|